The following guide is a recommended checklist to consider before your first flight with Vesper. Please review this document and familiarize yourself with the steps described and make them part of your first and subsequent flights with Vesper. ...
Vesper Compass Calibration Power on Vesper Power on Vision GCS Tap “Q” at the top left of the screen Tap “Vehicle Setup” Tap “Sensors” Tap “Compass” Ensure that “ROTATION_PITCH_180” is selected in the drop-down menu Tap “OK” Follow the onscreen ...
Vesper does not have native obstacle avoidance. The QGC software on the Vision GCS allows for changing the setting that allows an operator to enable "Collision Prevention" and "Obstacle Avoidance". This however is problematic because enabling these ...
There may be an instance where an operator encounters an issue where the Vesper camera zoom buttons don't work or have become inverted. To correct this issue follow the steps below Power on Vesper and wait for the turquoise LED to switch to blue or ...
Requirements prior to starting Vesper and accompanying MicroSD card Vesper battery charged > 30% Computer / laptop with internet access to download firmware Time, process may take up to 30 minutes Part I: Prepare MicroSD card Remove MicroSD card from ...