Vesper
ATAK UAS Tool Initial Setup - Vesper
Use the following instructions to setup UAS Tool and Vesper for the first time: Power on Vision2 and Vesper Open Vantage QGC and verify video stream is present Enable Frequency Hopping (if available) and/or conduct a Channel Scan via the Vantage ...
Vesper Pairing Sequence and Improved Radio Features (QGC)
Pairing Vesper and Vision GCS - New Connection Follow instructions below in sequence. Part I: Power on GCS Vision2 - power on GCS and allow bootup/initialization sequence to complete. QGC will auto-launch indicating completion. Install Swappable ...
How to Recalibrate the Vesper Greenseer Gimbal
Recalibrating the Vesper Gimbal Periodically there may be times when the gimbal on a Vesper fails to properly stabilize. When this happens it may be necessary to recalibrate the gimbal before proceeding. The video below demonstrates the process of ...
How to Calibrate Vesper's Compass
Vesper Compass Calibration Power on Vesper Power on Vision GCS Tap “Q” at the top left of the screen Tap “Vehicle Setup” Tap “Sensors” Tap “Compass” Ensure that “ROTATION_PITCH_180” is selected in the drop-down menu Tap “OK” Follow the onscreen ...
How to Register your Vesper UAV
Register Vesper with your National Aviation Authority UAVs such as Vesper are generally required to be registered with your appropriate National Aviation Authority. We recommend that all users required to register their aircraft do this before flying ...
Updating Vesper Firmware
Requirements prior to starting Vesper and accompanying MicroSD card Vesper battery charged > 30% Computer / laptop with internet access to download firmware Time, process may take up to 30 minutes Part I: Prepare MicroSD card Remove MicroSD card from ...