Vision1 GCS
Flashing the GCS Update Image to a Flash Drive
Flash the GCS Update image to a Flash Drive The recommended process for updating the Vision1 GCS software requires "flashing" the GCS Update USB image to a USB 2.0 flash drive. Please refer to Flashing the GCS Update image to a Flash Drive prior to ...
Vision GCS battery level tops out at ~65%
ISSUE The Vision Ground Control Station (GCS) may only show that it has charged to a maximum of 65% when it should show a full charge. REASON The Vantage Robotics engineering team is actively investigating this issue and working on a resolution. ...
How to add a WiFi network to a Vision GCS
Add a WiFi network to a Vision GCS Power on Vision GCS Log into your Vision (if necessary) Triple-tap the top of the Flight Controller screen to get access to the Vision Desktop Tap “Show Applications” at the bottom left of the screen Tap “Settings” ...
Updating Vision1 GCS Software (QGC)
Required prior to starting: Vision GCS charged to 50% or higher USB-A thumbstick (flash drive) loaded with GCS software see Vantage Robotics Vision GCS Flash Drive updater USB-A to USB-C adapter GCS Update instructions Turn on Vision GCS Log in to ...