VR QGroundControl (QGC)
How to download/extract Vesper flight logs
Before downloading Vesper flight logs, users need to enable flight telemetry and SD card logging. Please refer to How to enable Vesper telemetry and SD Card logging. Downloading and extracting Vesper flight logs is a multi-step process, the first ...
How to edit or check Return To Launch (RTL) settings
Check or change Return to Launch (RTL) Settings Connect to vehicle Tap “Q” in the upper left of the GCS screen Select “Vehicle Setup” from the menu on the left Select “Safety” from the menu on the left Scroll down to “Return to Launch Settings” ...
How to Change or Check units
Change or check units Power up Vesper and Vision GCS. Log in to Vision if necessary Tap the “Q” at the top left of the Vision screen Tap “Settings” Tap “General” Select “Distance” units from the associated drop-down menu Select “Area” units from the ...
Check Vesper GPS Ephemeris Data
Check Vesper GPS Ephemeris Data Power on Vesper Power on Vision GCS Make sure the aircraft has connected to Vision Tap the GPS Status Icon at the top of the Vision screen Confirm that more than 10 satellites are in view Confirm HDOP is less than 0.09
Change Video Resolution for low-light conditions
Change Video Resolution for low-light conditions Power on Vesper Power on Vision GCS Log in to Vision if necessary Tap the Camera “Settings” icon below the red camera shutter button Locate the “Video Resolution” section in the Video Settings dialog ...
How to Download Offline Maps to Vision GCS
Loading Offline Map data onto Vision GCS By default, Vision arrives preloaded with a low-resolution world base map. Before flying we recommended that operators download and install map tiles for the area(s) the operator is expected to fly. Adding new ...
How to enable or disable Vesper Flight Data Logging
Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled. The instructions below provide operators with instructions about either enabling or disabling Vesper flight data logging. Note: Enabling ...
How to reassign Vesper Camera Zoom buttons
There may be an instance where an operator encounters an issue where the Vesper camera zoom buttons don't work or have become inverted. To correct this issue follow the steps below Power on Vesper and wait for the turquoise LED to switch to blue or ...
How to extract telemetry logs from Vision GCS
Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled after the aircraft has been armed. The flight data log contains information about various aircraft conditions such as motor speed, battery ...