Can Vesper fly preprogrammed patterns around an object or controller?
The QGC control software can be used to program repeated orbits around a fixed location. It is not currently possible to do so around a target in motion. For more details about planning behaviors and missions please refer to the QGroundControl user guide.
Related Articles
Vesper First Flight Guide
The following guide is a recommended checklist to consider before your first flight with Vesper. Please review this document and familiarize yourself with the steps described and make them part of your first and subsequent flights with Vesper. ...
Obstacle Avoidance settings for Vesper
Vesper does not have native obstacle avoidance. The QGC software on the Vision GCS allows for changing the setting that allows an operator to enable "Collision Prevention" and "Obstacle Avoidance". This however is problematic because enabling these ...
What is Vesper's range?
The maximum distance that the Vesper can communicate with the Vision1 GCS is 6 km with a typical range of around 4 km. The maximum distance coverable in a single flight is about 45km, at an optimal cruise speed of around 15 m/s (34 mph).
Is Vesper compatible with third-party controllers?
Yes, in addition to the Vantage Robotic Vision GCS, Vesper can be flown by Auterion’s SkyNav controller.
How to Recalibrate the Vesper Greenseer Gimbal
Recalibrating the Vesper Gimbal Periodically there may be times when the gimbal on a Vesper fails to properly stabilize. When this happens it may be necessary to recalibrate the gimbal before proceeding. The video below demonstrates the process of ...