How are data stored and accessed on Vesper?

• Related Articles

• How to enable or disable Vesper Flight Data Logging

  Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled. The instructions below provide operators with instructions about either enabling or disabling Vesper flight data logging. Note: Enabling ...

• Check Vesper GPS Ephemeris Data

  Check Vesper GPS Ephemeris Data Power on Vesper Power on Vision GCS Make sure the aircraft has connected to Vision Tap the GPS Status Icon at the top of the Vision screen Confirm that more than 10 satellites are in view Confirm HDOP is less than 0.09

• Updating Vesper Firmware

  Requirements prior to starting Vesper and accompanying MicroSD card Vesper battery charged > 30% Computer / laptop with internet access to download firmware Time, process may take up to 30 minutes Part I: Prepare MicroSD card Remove MicroSD card from ...

• Vesper First Flight Guide

  The following guide is a recommended checklist to consider before your first flight with Vesper. Please review this document and familiarize yourself with the steps described and make them part of your first and subsequent flights with Vesper. ...

• How are data transferred off of Vesper?

  Recorded files are transferred on and off via an onboard SD card. Footage can also be captured by recording the stream onto the control device.