How to enable or disable Vesper Flight Data Logging

How to enable or disable Vesper Flight Data Logging

Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled. The instructions below provide operators with instructions about either enabling or disabling Vesper flight data logging.

Note: Enabling logging is required for any drone incident warranty claims.

 

 Enable Vehicle Flight Logging 

  1. Turn on GCS & Vesper
  2. Allow GCS to connect to Vesper
  3. Select the QGC “Q” icon in the top left corner of the screen
  4. From the drop-down menu, select “Vehicle Setup”
  5. Now Select “Safety”
  6. Scroll down to “Vehicle Telemetry Logging”
  7. Select “Enabled” from the "Telemetry logging to vehicle storage" drop-down menu
  8. Acknowledge the pop-up that appears
  9. Allow the vehicle to automatically reboot
    1. Manually power cycle if the reboot does not trigger within 1 minute
  10. Repeat steps 2-6
  11. Verify “enabled” is still selected 
    1. Contact Customer Support if the parameter did not save

 Disable Vehicle Flight Logging 

  1. Turn on GCS & Vesper
  2. Allow GCS to connect to Vesper
  3. Select the QGC “Q” icon in the top left corner of the screen
  4. From the drop-down menu, select “Vehicle Setup”
  5. Now Select “Safety”
  6. Scroll down to “Vehicle Telemetry Logging”
  7. Select “Disabled” from the drop-down
  8. Acknowledge the pop-up that appears
  9. Allow the vehicle to automatically reboot
  10. Repeat steps 2-6
  11. Verify “disabled” is still selected 
    1. Contact Customer Support if the parameter did not save

    • Related Articles

    • Vesper First Flight Guide

      The following guide is a recommended checklist to consider before your first flight with Vesper. Please review this document and familiarize yourself with the steps described and make them part of your first and subsequent flights with Vesper. ...

    • How to download/extract Vesper flight logs

      Before downloading Vesper flight logs, users need to enable flight telemetry and SD card logging. Please refer to How to enable Vesper telemetry and SD Card logging. Downloading and extracting Vesper flight logs is a multi-step process, the first ...

    • Check Vesper GPS Ephemeris Data

      Check Vesper GPS Ephemeris Data Power on Vesper Power on Vision GCS Make sure the aircraft has connected to Vision Tap the GPS Status Icon at the top of the Vision screen Confirm that more than 10 satellites are in view Confirm HDOP is less than 0.09

    • What is the expected Vesper flight time?

      Vesper UAV Flight times with Endurance battery: 50+ minutes mixed flight mode with recon rotor set 44+ minutes hover mode with recon rotor set 32 minutes mixed flight mode with shrouded rotor set

    • How to extract telemetry logs from Vision GCS

      Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled after the aircraft has been armed. The flight data log contains information about various aircraft conditions such as motor speed, battery ...