How to add a WiFi network to a Vision GCS

How to add a WiFi network to a Vision GCS

Add a WiFi network to a Vision GCS

  1. Power on Vision GCS
  2. Log into your Vision (if necessary)
  3. Triple-tap the top of the Flight Controller screen to get access to the Vision Desktop
  4. Tap  “Show Applications” at the bottom left of the screen
  5. Tap  “Settings”
  6. Tap “Wi-Fi”
  7. Make sure that “Airplane Mode” is disabled
  8. Look for your wireless network name in the “Visible Networks” list
  9. Tap the network name that you want to add
  10. Enter the Network password in the Password field that appears
  11. Tap “Connect”
  12. Tap the “Red X” at the top right to close the window. 
  13. Restart Vision GCS

    • Related Articles

    • How to Download Offline Maps to Vision GCS

      Loading Offline Map data onto Vision GCS By default, Vision arrives preloaded with a low-resolution world base map. Before flying we recommended that operators download and install map tiles for the area(s) the operator is expected to fly. Adding new ...

    • Vision GCS battery level tops out at ~65%

      ISSUE The Vision Ground Control Station (GCS) may only show that it has charged to a maximum of 65% when it should show a full charge. REASON The Vantage Robotics engineering team is actively investigating this issue and working on a resolution. ...

    • How to extract telemetry logs from Vision GCS

      Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled after the aircraft has been armed. The flight data log contains information about various aircraft conditions such as motor speed, battery ...

    • How long will the Vision GCS batteries last?

      Vision batteries are expected to last up to 4 hours piloting with brightness at 700 nits.

    • Updating Vision1 GCS Software (QGC)

      Required prior to starting: Vision GCS charged to 50% or higher USB-A thumbstick (flash drive) loaded with GCS software see Vantage Robotics Vision GCS Flash Drive updater USB-A to USB-C adapter GCS Update instructions Turn on Vision GCS Log in to ...