How long will the Vision GCS batteries last?

• Related Articles

• How to extract telemetry logs from Vision GCS

  Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled after the aircraft has been armed. The flight data log contains information about various aircraft conditions such as motor speed, battery ...

• Updating Vision1 GCS Software (QGC)

  Required prior to starting: Vision GCS charged to 50% or higher USB-A thumbstick (flash drive) loaded with GCS software see Vantage Robotics Vision GCS Flash Drive updater USB-A to USB-C adapter GCS Update instructions Turn on Vision GCS Log in to ...

• Flashing the GCS Update Image to a Flash Drive

  Flash the GCS Update image to a Flash Drive The recommended process for updating the Vision1 GCS software requires "flashing" the GCS Update USB image to a USB 2.0 flash drive. Please refer to Flashing the GCS Update image to a Flash Drive prior to ...

• How to add a WiFi network to a Vision GCS

  Add a WiFi network to a Vision GCS Power on Vision GCS Log into your Vision (if necessary) Triple-tap the top of the Flight Controller screen to get access to the Vision Desktop Tap “Show Applications” at the bottom left of the screen Tap “Settings” ...

• Vision GCS battery level tops out at ~65%

  ISSUE The Vision Ground Control Station (GCS) may only show that it has charged to a maximum of 65% when it should show a full charge. REASON The Vantage Robotics engineering team is actively investigating this issue and working on a resolution. ...