How to Change or Check units

How to Change or Check units

Change or check units

  1. Power up Vesper and Vision GCS.
  2. Log in to Vision if necessary
  3. Tap the “Q” at the top left of the Vision screen
  4. Tap “Settings”
  5. Tap “General”
  6. Select “Distance” units from the associated drop-down menu
  7. Select “Area” units from the associated drop-down menu
  8. Select “Speed” units from the associated drop-down menu
  9. Select “Temperature” units from the associated drop-down menu
  10. Tap the “Q” at the top left of the Vision screen

    • Related Articles

    • How to edit or check Return To Launch (RTL) settings

      Check or change Return to Launch (RTL) Settings Connect to vehicle Tap “Q” in the upper left of the GCS screen Select “Vehicle Setup” from the menu on the left Select “Safety” from the menu on the left Scroll down to “Return to Launch Settings” ...

    • Check Vesper GPS Ephemeris Data

      Check Vesper GPS Ephemeris Data Power on Vesper Power on Vision GCS Make sure the aircraft has connected to Vision Tap the GPS Status Icon at the top of the Vision screen Confirm that more than 10 satellites are in view Confirm HDOP is less than 0.09

    • Change Video Resolution for low-light conditions

      Change Video Resolution for low-light conditions Power on Vesper Power on Vision GCS Log in to Vision if necessary Tap the Camera “Settings” icon below the red camera shutter button Locate the “Video Resolution” section in the Video Settings dialog ...

    • Vesper First Flight Guide

      The following guide is a recommended checklist to consider before your first flight with Vesper. Please review this document and familiarize yourself with the steps described and make them part of your first and subsequent flights with Vesper. ...

    • Vesper Pairing Sequence and Improved Radio Features (QGC)

      Pairing Vesper and Vision GCS - New Connection Follow instructions below in sequence. Part I: Power on GCS Vision2 - power on GCS and allow bootup/initialization sequence to complete. QGC will auto-launch indicating completion. Install Swappable ...