How to edit or check Return To Launch (RTL) settings
Check or change Return to Launch (RTL) Settings
- Connect to vehicle
-
Tap “Q” in the upper left of the GCS screen
-
Select “Vehicle Setup” from the menu on the left
-
Select “Safety” from the menu on the left
-
Scroll down to “Return to Launch Settings”
-
Update the number to the right of “Climb to Altitude of:” to the desired value
-
Tap “Q” and select “Fly” to return to the Fly View
Related Articles
How to Change or Check units
Change or check units Power up Vesper and Vision GCS. Log in to Vision if necessary Tap the “Q” at the top left of the Vision screen Tap “Settings” Tap “General” Select “Distance” units from the associated drop-down menu Select “Area” units from the ...
Check Vesper GPS Ephemeris Data
Check Vesper GPS Ephemeris Data Power on Vesper Power on Vision GCS Make sure the aircraft has connected to Vision Tap the GPS Status Icon at the top of the Vision screen Confirm that more than 10 satellites are in view Confirm HDOP is less than 0.09
Obstacle Avoidance settings for Vesper
Vesper does not have native obstacle avoidance. The QGC software on the Vision GCS allows for changing the setting that allows an operator to enable "Collision Prevention" and "Obstacle Avoidance". This however is problematic because enabling these ...
Reinstate Missing Camera Settings after updating to Vesper Software Update 1.9.4
After updating to Vesper software 1.9.4 some users may experience the loss of certain camera settings, specifically, the camera resolution settings do not appear after the update. To correct this please follow the instructions below. Download the ...
Vesper First Flight Guide
The following guide is a recommended checklist to consider before your first flight with Vesper. Please review this document and familiarize yourself with the steps described and make them part of your first and subsequent flights with Vesper. ...