Reinstate Missing Camera Settings after updating to Vesper Software Update 1.9.4
After updating to Vesper software 1.9.4 some users may experience the loss of certain camera settings, specifically, the camera resolution settings do not appear after the update. To correct this please follow the instructions below.
- Download the greenseer_eo_parameters.xml and greenseer_ir_parameters.xml linked below at the bottom of this page
- Remove the microSD card from the bottom side of the Vesper
- Insert the microSD card into a card reader connected to a computer
- Open the card titled "Vesper" to access the card's contents
- Locate the greenseer_eo_parameters.xml and greenseer_ir_parameters.xml files attached to this email
- Move both of the XML files mentioned above to the root level of the Vesper microSD card.
Refer to the image below for reference:
- Remove the microSD card from the computer
- Insert the microSD card into Vesper
- Power on Vesper and your GCS, the camera resolution setting should now be available
Related Articles
Vesper Battery Update Instructions
Vesper Batteries have firmware installed that enables the battery to properly charge and discharge for the best battery life and performance. The version of the battery firmware is checked by Vesper during the boot-up process. If Vesper determines ...Updating Vision1 GCS Software (QGC)
Required prior to starting: Vision GCS charged to 50% or higher USB-A thumbstick (flash drive) loaded with GCS software see Vantage Robotics Vision GCS Flash Drive updater USB-A to USB-C adapter GCS Update instructions Turn on Vision GCS Log in to ...Obstacle Avoidance settings for Vesper
Vesper does not have native obstacle avoidance. The QGC software on the Vision GCS allows for changing the setting that allows an operator to enable "Collision Prevention" and "Obstacle Avoidance". This however is problematic because enabling these ...Updating Vesper Firmware
Requirements prior to starting Vesper and accompanying MicroSD card Vesper battery charged > 30% Computer / laptop with internet access to download firmware Time, process may take up to 30 minutes Part I: Prepare MicroSD card Remove MicroSD card from ...Vesper System Version 2.1
Vesper firmware and Vision GCS software updates are released periodically. Download software updates from links below and install according to linked instructions. Vesper Firmware Version: 2.1.22 Release Date: August 26, 2024 Download Vesper firmware ...