Vesper System Version 2.1

Vesper System Version 2.1

Vesper firmware and Vision GCS software updates are released periodically. Download software updates from links below and install according to linked instructions. 

 Vesper Firmware

 Vision1 QGC Software

Vision2 QGC Software   
After updating both the UAV and GCS: Tap Q > tap Settings > scroll to bottom of page.  Confirm successful download, if versions do not match, reinstall.

 


    • Related Articles

    • Vesper User Manual Version 2.0

      Version: 2.0 October 2024 Download Vesper User Manual

    • Vesper Battery Update Instructions

      Vesper Batteries have firmware installed that enables the battery to properly charge and discharge for the best battery life and performance. The version of the battery firmware is checked by Vesper during the boot-up process. If Vesper determines ...

    • Vesper Pairing Sequence and Improved Radio Features (QGC)

      Pairing Vesper and Vision GCS - New Connection Follow instructions below in sequence. Part I: Power on GCS Vision2 - power on GCS and allow bootup/initialization sequence to complete. QGC will auto-launch indicating completion. Install Swappable ...

    • Updating Vesper Firmware

      Requirements prior to starting Vesper and accompanying MicroSD card Vesper battery charged > 30% Computer / laptop with internet access to download firmware Time, process may take up to 30 minutes Part I: Prepare MicroSD card Remove MicroSD card from ...

    • Obstacle Avoidance settings for Vesper

      Vesper does not have native obstacle avoidance. The QGC software on the Vision GCS allows for changing the setting that allows an operator to enable "Collision Prevention" and "Obstacle Avoidance". This however is problematic because enabling these ...