Does Vesper have onboard recording or is all of the recording done on the remote controller? Is the GCS recording on a removable storage device, or on a hard drive embedded in the GCS?

Does Vesper have onboard recording or is all of the recording done on the remote controller? Is the GCS recording on a removable storage device, or on a hard drive embedded in the GCS?

Vesper has 64 GB of onboard recording in internal flash memory and an optional SD card slot. GCS recording is done on a 256 or 500 GB internal SSD.

    • Related Articles

    • Flashing the GCS Update Image to a Flash Drive

      Flash the GCS Update image to a Flash Drive The recommended process for updating the Vision1 GCS software requires "flashing" the GCS Update USB image to a USB 2.0 flash drive. Please refer to Flashing the GCS Update image to a Flash Drive prior to ...

    • Updating QGC on Vision2 GCS

      Requirements prior to starting: Vision2 GCS charged > 20% Laptop / computer with internet access to download software USB-C cable to connect Vision2 and computer/laptop (Windows only) Alternatively, a flash drive to transfer files between laptop / ...

    • Does the remote controller (GCS) have a dimmer for tactical purposes?

      Yes, Vision GCS users can control the brightness of the screen via the two dimmer control buttons located on the top of the unit.

    • Updating Vision1 GCS Software (QGC)

      Required prior to starting: Vision GCS charged to 50% or higher USB-A thumbstick (flash drive) loaded with GCS software see Vantage Robotics Vision GCS Flash Drive updater USB-A to USB-C adapter GCS Update instructions Turn on Vision GCS Log in to ...

    • How to extract telemetry logs from Vision GCS

      Flight data are stored in Vesper's internal memory when the "Vehicle Flight Logging" parameter is enabled after the aircraft has been armed. The flight data log contains information about various aircraft conditions such as motor speed, battery ...